Warm up to comfort, safety, & savings! 

During the year, your heating system accumulates dust and dirt, making it less efficient and costing you additional money in utility bills. Add on the lack of regular furnace inspection and maintenance, and you can count on your furnace breaking down before you can say, “Winter is here!”

It’s important to us to make sure that doesn’t happen!

Industry experts are forecasting that energy prices are going to skyrocket in the months ahead. Electric and gas rates have already risen this year and are expected to continue to rise in the future. An inspection and cleaning help your furnace run more efficiently and use less energy…saving you money. It’s the best thing you can do to guarantee a warm, worry-free, energy-efficient home through the last few weeks of Winter and into the spring season!

Here’s what will happen:

Your F.H. Furr service technician will perform a complete Home Comfort 28 Point Furnace Inspection / Heating Inspection of your furnace or heating system that will take about a half hour to one hour to complete.

Your Heating / Gas Furnace Comfort Inspection:

1. Visually inspect capacitors for leakage and rust
2. Inspect readily accessible ducts for obvious air leaks
3. Complete operations sequence check
4. Check the crankcase heater for proper maintenance
5. Inspection of air filtration system
6. Inspect blower wheel
7. Inspect blower and motor and record AMP draw (lubricate as needed)
8. Replacement of filter provided by the customer while on-site at the time of inspection
9. Inspect unit wiring and electrical disconnect
10. Check and calibrate thermostat as required
11. Inspect gas lines and connections at the furnace/boiler for leaks
12. Check high limit control (adjust as needed)
13. Inspect burner ignition system and assembly
14. Inspect gas burners
15. Check and adjust manifold gas pressure
16. Check temperature rise across the heat exchanger for overheating
17. Inspect the heat exchanger for soot, corrosion, cracks and deformities
18. Inspect gas valve for corrosion, leaks, restriction of gas flow and abnormal noise
19. Inspect furnace/boiler wiring assembly for loose connections
20. Inspect flue and venting for obstructions and leaks
21. Check the electrical circuit to the furnace/boiler. Test all electrical/safety circuits/controls for proper operation
22. Inspect the entire furnace/boiler for loose or worn parts and abnormal vibrations
23. Test and adjust the unit for peak operating efficiency
24. Check carbon monoxide emission level or pass/fail
25. Check defrost cycle and reversing valve operation (heat pumps only)
26. Tighten screw lug terminals in the condensing unit (heat pumps only)
27. Check refrigerant level (heat pumps only)
28. Check emergency heat systems for proper operation (heat pumps only)

A Home Comfort 28 Point Heating Inspection ensures your equipment is operating safely and not leaking dangerous carbon monoxide into your home. Preventive maintenance also saves money by maximizing efficiency and minimizing costly breakdowns. Plus, when you maintain your system, your warranty is protected!